Brown heat shrink tube 2:1 with one-sided printing
- The brown shrinking tube with shrinking ratio: 2:1 with printing priced for 1m. We offer monochromatic printing in black, white, red, blue, green, pink, silver, and gold.
In a set
2:1 Heat Shrinking tubePrice: 5,49 zł / running meter
We offer single-colour printing: red, blue, green, pink, black, white, silver or gold on tubing available in the following colours: black, white, red, blue, green, yellow, grey, orange, purple, brown. Other tubes colours are available on request.
This is the perfect solution for marking cables. We can print a company logo, phone number, cable length, etc. It is also possible to print an individual number on each heat-shrink sleeve, allowing every single cable to have its own unique identifier.
Longitudinal shrinkage: from 0 to 10% max. Actual longitudinal shrinkage varies for each heat-shrink tube and depends on the colour/size/production batch of the tubing. This makes it impossible to apply a correction that would compensate for longitudinal shrinkage at the design stage of the print. We recommend taking this parameter into account when ordering heat-shrink tubes in different colours intended for the same application or when used side by side (for example, black and red as channel markings for two connectors in an audio signal path).
Details:
– product: heat-shrink tube,
– shrink ratio: 2:1,
– operating temperature: -55 ℃ to +125 ℃,
– recommended working temperature range: -20 °C to +70 °C,
– min. full shrink temperature: +100 ℃,
– flexible,
– non-flammable,
– high elasticity.
HOW TO ORDER HEAT-SHRINK TUBE WITH PRINT:
Choose the tubing size: the first number indicates the tube diameter in mm before shrinking, the second number after shrinking.
Choose the print colour.
Place an order through the store.
Pay for the order.
Send an email to termokurcz@pateam.pl - include the order number in the subject line and attach the graphic to be printed. The graphic must be in JPG, PDF or PNG format and must be achromatic (two-colour - black and white only, with no shades of grey).
- In the approval draft, black represents the print and white represents the background.
If you want to print a simple text or numbers, write it in the email — specify the font and style in which you want the text to appear.
- If you have additional guidelines regarding the print (e.g., spacing between graphics), include them in the email.
ATTENTION!
Please remember that the submitted design must take into account the proportions after the heat-shrink tubing is shrunk (e.g., to prevent a circle from turning into an oval). It is necessary to stretch the graphic according to the required shrink ratio.
Please note that it is not possible to print the tube “360 degrees” – the edges will always remain unprinted.
The print height is different from the tube diameter. In the table below, you can check the maximum print height for each size of heat-shrink tubing.
| Tube diameter | Maximum print height |
| 3x1 | 5 mm |
| 4,5x1,5 | 6 mm |
| 4,8x2,4 | 6 mm |
| 6x2 | 9 mm |
| 6,4x3,2 | 9 mm |
| 9x3 | 14 mm |
| 9,5x4,8 | 15 mm |
| 12x4 | 20 mm |
| 12,7x6,4 | 20 mm |
| 16x8 | 25 mm |
| 18x6 | 30 mm |
| 19,1x9,5 | 32 mm |
| 21x5,5 | 32 mm |
| 24x8 | 39 mm |
| 25,4x12,7 | 40 mm |
| 32x16 | 51 mm |
| 38x19 | 61 mm |
| 39x13 | 62 mm |
| 50x25 | 80 mm |